T-45 Parts
Home Up T-45 Parts T-45 History T-45 Transmissions

 

Pro-Force now offers the same custom parts formerly offered by The T45 Source.

T-45 Bearing and Seal kit -  $210.00 
- This kit includes:
   Front and rear counter shaft bearings, main shaft bearing, input shaft bearing, 
   caged input bearing, plastic fork pads, input seal and tail seal

T-45 Synchro Ring Kit - $275.00
- This kit includes:
   Two rings for Fifth and Reverse Gears
   Two rings for Third and Fourth Gears
   Two 1-piece redesigned center rings for First and Second gears
    (Inner and outer cones for first and second are not included in this set)
    *(ALL rings are upgraded Carbon-Fiber lined.  First and Second gear rings are T-56 Style)

Fork Pad Upgrade Kit - $50.00
- This kit includes:
   4 Bronze Fork Pads for the 1-2 & 3-4 shift forks

26 Spline T-45 Input Shaft - $450.00 - (out of stock)
- This is an all-new shaft and not a modified shaft.
- The stock 10-spline input shaft is a weak spot in a stock T-45.

Shift Forks:
- SureShift 1-2 & 3-4 Fork Kit - 450.00
   Firm up our 1-2 and your 3-4 shifts with this billet fork kit.
   Includes Custom Billet 1-2 and 3-4 Forks, 4 Custom Bronze Fork Pads and the SureShift 1-2 and 3-4 Shift Plates.

- SureShift 1-2 Fork Kit - 225.00
   Firm up our 1-2 shifts with this billet fork kit.
   Includes Custom Billet 1-2 Fork, 2 Custom Bronze Fork Pads and the SureShift 1-2 Shift Plate.

- SureShift 3-4 Fork Kit - 225.00
   Firm up our 3-4 shifts with this billet fork kit.
   Includes Custom Billet 3-4 Fork, 2 Custom Bronze Fork Pads and the SureShift 3-4 Shift Plate.

- Billet 1-2 Fork - 175.00
   Includes Custom Billet 1-2 Fork and 2 Custom Bronze Fork Pads.

- Billet 3-4 Fork - 175.00
   Includes Custom Billet 3-4 Fork and 2 Custom Bronze Fork Pads.

- SureShift 1-2 Shift Plate - 55.00
   Replace the stock 1-2 shift plate with this stronger billet plate.

- SureShift 3-4 Shift Plate - 55.00
   Replace the stock 3-4 shift plate with this stronger billet plate.

Additional Rebuild Parts:
    Clutch Fork 1994-2004 V-6 and V-8 (OEM) - (out of stock - try your Ford Dealer)
    Clutch Pivot Bolt (Pivot Ball) (94-04 OE Ford Part) - $22.00
    Clutch Throwout Bearing (79-04 OE Ford Part) - $55.00
    Billet Throwout Bearing Quill Tube  (fits 96-98 T-45 but NOT 99-01 T-45 also fits 03/04 COBRA T-56) - $120.00